I always have questions about my nightstands and how I filled the predrilled holes so here is how I got the Crate & Barrel Keane nightstand look! 😍 They are also on a big sale right now! ✨ PLEASE READ BEFORE BEGINNING (for your safety & to avoid mistakes) Supplies needed: - Nightstand(s) - Antigue gold knobs - Epoxy putty - Furniture repair kit - Gloves (please wear these when using the epoxy for your safety 🤍) - A drill - Measuring tape Steps: 1. Using gloves, take a piece of epoxy putty and mix it together really well by squishing it between your fingers. Roll it thin like a Qtip so that you are able to push it into the predrilled knob holes, filling them without getting it on the door face. This is important as you don’t want to have to sand it down because it will scratch the paint on the drawer face. Tap it in with your index finger to get it as even as possible with the drawer. 2. Wait 1 hour before painting the epoxy with your black furniture repair pen. I did 2 coats, waiting 30 mins in between coats to allow for drying time. Try not to get it on the drawer face because it will darken it. 3. Drill new knob holes about 3”-3.5” from the outside of each drawer 4. Install your new knobs LTKStyleTip LTKSaleAlert LTKHome